Marco Sandblast Machines
Marco 350LB and 650LB Easy-Fill Abrasive Blasters
 Marco blast machines are available in 350 and 650 pound capacity sizes. Their low loading height makes the Easy-Fill Series blast machines truly easy to fill with bagged abrasive
Blasters come standard with pneumatic remote controls, inlet and outlet valves, muffler, abrasive trap, 50' twin line hose, pneumatic dead man handle.
Bantam metering valve for precise abrasive metering capabilities.
6" x 8" inspection door for easy maintenance.
1-1/2" valves and external fittings for higher production and greater safety.
350 lb. Portable blast pot - includes 50 ft. 1" I.D. coupled blast hose, #4 blaze nozzle and moisture separator with fittings.
650 lb. Portable blast pot - includes 50 ft. of 1-1/4" I.D. super-flex coupled blast hose, #5 blaze nozzle and moisture separator with fittings.
Marco 35 Portable Sandblast Machine
Model 35 - 35lb Capacity, with moisture separator, mixing valve, 10ft. of 1/2" blast hose and fitting and two 1/8" type 1 ceramic nozzles. Available with or without 66EVD/153 KwikFire dead man shutoff this machine can hold up to 0.35 cubic feet of very fine to medium mesh abrasive to expand your blasting time. With the 2-Hole Jr. Integrator abrasive mixing valve, controlling the flow of media is precise and easy aiding in job completion.
 Features:
0.35 cu/ft Blast Machine
Durable powder-coated finish
Compact portable design
Concave head for ease of filling
Triangle shaped handle for easy pressurization
Moisture separator
Pressure gauge
125 psi operating pressure
Stable tripod design
Wheels for increased mobility
2-Hole Jr. Integrator Mixing Valve
Cast iron abrasive mixing valve for durability & long life
10 ft. of 1/2" I.D. Coupled Blast Hose
W e i g h t: 80 lbs, Size: 14"W x 19"L x 35"H
Marco 150 Portable Sandblast Machine, 1.5 CU Ft Tank
Model 150 - 150lb. Capacity, with moisture separator, mixing valve, 25ft. of 1/2" blast hose and fittings, two 1/8" and two 5/32" type 1 ceramic nozzles. Available with or without 66EVD/153 KwikFire deadman shutoff. Touch-ups or complete job requirement, the 1.5 cu/ft Blast Machine is up for the task. With a moisture separator as part of the piping, you can count on dryer abrasive to reduce your downtime. Flexible pneumatic tires and a tilt-and-go handle make this machine highly mobile. Included proven 2-Hole Jr. Integrator Mixing Valve.
 Features:
Durable powder-coated finish
Compact portable design
Concave head for ease of filling
Triangle shaped handle for easy pressurization
Moisture separator
ASME code pressure vessel
Pressure gauge
125 psi operating pressure
Stable tripod design
Pneumatic tires & tilt-and-go handle for increased mobility
2-Hole Jr. Integrator Mixing Valve - cast iron abrasive mixing valve for durability & long life
25 ft. of 1/2" I.D. Coupled Blast Hose
W e i g h t:130 lbs, Size:14"W x 23"L x 33"
Marco (Lindsay) Parts & Accessories available. Call 1-800-544-5394.
Associated Parts
Part No. 10L100018 Kwikfire 153 - Valve Body
Part No. 10L100070 Kwikfire 153 - Valve Spindle
Part No. 10L100134 Kwikfire 153 - Insert Adapter
Part No. 10L100164 Nozzle Cap - Lrg Ceramic Nozzles
Part No. 10L100170 Kwikfire 153 - Cover
Part No. 10L100222 Lindsay Venturi Nozzle Conversion
Part No. 10L15300 Kwikfire 153 - Spindle O Ring
Part No. 10L174 Hose End For 1/2 in. I.D. Blast Hose
Part No. 10L366HE Hose End For 3/4 in. ID Blast Hose
Part No. 10L466HE Hose End For 1 in. ID Blast Hose
Part No. 10L66B Nozzle Holder Base 1/2 in. npt
Part No. 10L66CHW Nozzle Washer For Cer Nozzle
Part No. 10L66EVG Kwikfire 153 - Cover Gasket
Part No. 10L66EVST Kwikfire 153 - Valve Disc Stem
Part No. 10L66HS Nozzle Spacer For Norbide
Part No. 10L66RR Hose End - O Ring
Part No. 10L66RW Kwikfire 153 - Valve Washer
Part No. 10L66TB Kwikfire 153 - Spindle Bushing
Part No. 10L66VHD Kwikfire 153 - Valve Handle
Part No. 10L66VSS Kwikfire 153 - Spindle Spring
Part No. 10L66VW Kwikfire 153 - Shutoff Washer
Part No. 10L800149 Kwikfire 153 - Spindle E Clip
Part No. 10L800217 Kwikfire 153 - Spindle Set Screw
Part No. 10L800218 Kwikfire 153 - Shutoff Bolt
Part No. 10L800236 Rubber Liner - 3/4 in. ID Blast Hose
Part No. 10L800237 Rubber Liner - 1 in. ID Blast Hose
Part No. 10L800338 Grip For Nozzle Shutoff Handle
Part No. 10L804322 Kwikfire 153 - Nut For Spring Bolt
Part No. 10L805034 Kwikfire 153 - Star Washer
Part No. 10L805531 10-32 X 3/8 Socket Head Cap Screw
Part No. 10L805533 Screw Socket Hd 10-32 X 3/4 in.
Empire Super Blast Portable Sandblast Machines
Empire SuperBlast Portable Sandblasters
 Simplicity, safety, reliability and performance—those were our design goals when we engineered SuperBlast portables. Many years on tough jobs, such as removing corrosion, preparing surfaces for coating and maintaining heavy equipment, have proved that SuperBlast portables deliver exceptional value in the field.
A look at the features below will show you that SuperBlast portables are made of the “right stuff.” These rugged systems are the product of ingenuity and experience; they combine a host of standard features designed to boost productivity and profits. In addition, they can be ordered in a variety of configurations, including your choice of pneumatic or electric remote controls, a complete OSHA package and a full line of accessories.
SuperBlast® makes short work of big projects; and small jobs are a snap. For the best blasting results, nothing beats SuperBlast. Available in P-150 (150 cu ft capacity) and P-300 (300 cu ft capacity)
Features
A. Low profile reduces the strain of lifting heavy bags of grit. Deep position of built-in screen eliminates the need for height-raising add-on screens.
B. E-Z Fill™ (Patent No. 4,557,825) breaks bags on contact, eliminating cutting and manipulating heavy bags. Built-in screen stops debris that clogs and shuts down other types of blasters. Large, six-inch opening saves time by permitting faster refills.
C. Sound attenuator reduces noise.
D. Dry-Flo™ moisture and oil separator keeps you blasting by removing water that can lead to media caking or freezing and assures smooth media flow. It keeps you up and running, even under adverse conditions.
E. Compact, front-mounted controls reduce the chance of damage when loading or unloading from trucks. Slim design lets you wheel SuperBlast® through narrow doorways with no damage to piping. Petcock, a safety precaution, allows you to signal the operator and shut down the system at the pressure vessel.
F. Large piping assures ample air-volume for high-speed blasting. One inch is provided on 350 models and 1-1/4 inch on 650 and 1050 models.
G. Flexible air line simplifies maintenance, prevents air leaks, and eliminates performance-robbing pressure drops caused by multiple fittings.
H. The Sure-Flo grit valve delivers reliable, precise performance and can be serviced easily in the field.
I. Rugged pressure vessel meets ASME and National Board standards.
Empire EconoBlast Portable Sandblasters
Empire Econo-Blast portable sandblasters are compact pressure blasters that share many features with their big brother, SuperBlast. Available in three sizes with grit capacities of 1, 1.5, and 3 cubic feet, these portables include ASME vessel certification for safety, flexible air hose for ease of maintenance, wheels for portability, and a pressure gauge. Less grit capacity and smaller nozzles make these units ideal for spot blasting and detail work, particularly on a limited budget.
Larger Econo-Blast models can he equipped with Empire's patented Sure-Flo grit valve and 680 remote controls for safety. With these controls, blasting stops the instant the nozzle is released.
Complete packages are available to protect the operator from blasting and potentially hazardous dust per OSHA requirements. Further, these packages include all the blasting equipment and accessories necessary to get you up and running safely.
Empire Stationary SuperBlast Sandblasters
 Empire Stationary Sandblasters are available in 350, 1050 cubic feet capacity systems. The 780 Remote Control System keeps your tank pressurized so that you do not wait between each blast job. This system includes the remote control handle with dual line hose (55ft) with fittings. The actual sand blast hose with connectors and nozzle holder is an option due to the wide variety sizes available and is not included in the tank cost.
The Super-Blast Stationary models include technological advances such as the Sure-Flo grit valve and media regulator, a Key to the popularity of the Super-Blast. The media path through the valve is straight down, assuring dependable flow. Abrasive media contacts only one part, a gum rubber pinch tube. Not only is the tube exceptionally long lasting it is also inexpensive and simple to replace, even in the field, meaning you enjoy more productive time and virtually maintenance free operation.
With the Sure-Flo, metering is easy and precise – saving you mountains of media. It’s as simple as turning a handle. Also, a variety of tube sizes are available to meet special applications requirements.
Empire Pneumatic Blast & Recovery
With Empire's Pneumatic Blast & Recovery System (PRS), you can take advantage of the savings provided by more durable media for only a modest investment. The PRS lets you move up to recyclable media which can be used effectively over and over.
The Pneumatic Blast & Recovery System consists of a high performance, high-vacuum dust collector, blower, and motor with an 800 CFM reclaimer and a storage hopper designed to fit on top of a portable pressure vessel. The pressure vessel may be previously purchased or supplied with the system.
Several models to choose from.
Empire Sandblaster Parts & Accessories available. Call 1-800-544-5394.
Hirons Model J Automatic Sandblaster
The Hirons Model J Automatic Sandblaster is a complete front for a sandblasting booth. The Model J is fully assembled and test run prior to shipment. It has been proven in hundreds of retail and wholesale shops
to perform under the most demanding conditions.
- Available in two sizes:
8’ Model with 60” horizontal travel.
10’ Model with 84” horizontal travel.
Hiron Model J Sandblaster Brochure
- A compact machine that is fully assembled and tested prior to shipment. Install it in less than a day.
- Designed for the constant motion of automatic sandblast. Not an attachment to a manual curtain. No exposed chains, sprockets, or short life components.
- Full range of speeds for independent control of horizontal and vertical motion. Speed of
motion is adjustable during operation to “fine tune” coverage.
- Electrical power interruption will not stop nozzle motion in mid-stroke. Compressed air power will continue moving nozzle to extreme end of track. This safety feature provides time for operator to shutdown generator sand flow.
-Both models have 30” vertical travel that is easily adjustable within 55” vertical range.
Note - Option available for up to 52” travel.
Boride Sandblast Nozzles
 
Boride poly jacket nozzles offer top quality and lighter weight then conventional sandblast nozzles. Boride nozzles have the same carbide insert as the current popular nozzle on the market. The system does not require a nozzle cap, it simply screws into the holder and fits right against the sandblast hose. These nozzles provide long life and are competitively priced.
Carbide Sandblast Shaping Nozzles
We also carry carbide sandblast shaping nozzles for shaping and etching monuments and markers. These are designed for intricate lettering and find details. Very durable and long lasting sandblast nozzle.
Ceramic Sandblast Nozzles
Ceramic Sandblast nozzles are available in several sizes and shapes.
Air valves & Fittings
We carry all types of air hose valves and fittings designed for use with sandblasting and other industrial uses. Standard sizes are 3/8” and 1/2” air hose and fittings, Please call us for air hose valves and fittings. Phone 1-800-544-5394 or 706-283-3301
|
