3M Scotch Brand Monument Stencils & Fillers
3M Abrasive Blasting Stencil 519Y (Yellow Laminate) 48.0 mil (1.2mm) tan rubber adhesive, film laminate, with rubber adhesive, and easy release translucent white liner. Die cut, double liner format. Available as 12-1/2", 15", 18-3/4", 21", 25", and 30" in the 10 yard rolls.
3M Premium Abrasive Blasting Stencil 519YP Series Premium Product. Tan rubber with yellow translucent polyester inner liner. Extra thick translucent out liner for tracking. Highest adhesion label for double lined products. Wide format available.
519YP Hand-Cut and/or Die-Cut 15", 25" in 10 yard rolls. 30" in 10 and 20 yard rolls.
519YPS Gerber compatible Computer Stencil 15" in 10 yard rolls. 30" in 10 and 20 yard. rolls
519YPT IBM compatible Computer Stencil 15", 25", 27-1/2", 30", and 32-3/4" in 10 yard rolls. 25" and 30" are also available in 20 yard rolls.
3M Stencil 519YT (YELLOW LAMINATE) 48.0 mil (1.2 mm) tan rubber with rubber adhesive, yellow film laminate, with rubber adhesive and easy release translucent white liner. Computer cut, Tractor Feed, Double liner format. Available in 30", 25", 21", 18-3/4, and 15" in 10 yard rolls.
3M Stencil 519YS (YELLOW LAMINATE) 48.0 mil (1.2 mm) tan rubber with rubber adhesive, yellow film laminate, with rubber adhesive, and easy release translucent white liner. Computer cut, Slot Punched, Double liner format. Available as 30" and 15" in 10 yard rolls. The 30" is also available as a 20 yard roll.
3M Stencil 520T 45.0 mil (1.1 mm) tan rubber with gray rubber adhesive and easy release clear film liner. Computer cut, Tractor Feed, Single liner format. Available in 30", 25", 18-3/4, and 15" width in 10 yard rolls.
3M Stencil 520S 45.0 mil (1.1 mm) tan rubber with gray rubber adhesive and easy release clear film liner. Computer cut, Slot Punched, single liner format. Available in 30" and 15" in 10 yard rolls. The 30 available in 20 yard rolls.
3M Stencil 1532 37.0 mil. (0.94 mm) tan rubber with tan rubber adhesive and high release clear film liner. Hand and Die Cut, Single Liner format. Factory Order Only. Available in 10 yard rolls, 15" and 30".
3M Stencil 1532S 37.0 mil. (0.94 mm) tan rubber with tan rubber adhesive and high release clear film liner. Computer Cut, Slot Punched, Single Liner format. Factory Order Only. Available in 10 yard rolls, 15" and 30".
3M Stencil 1532T 37.0 mil. (0.94 mm) tan rubber with tan rubber adhesive and high release clear film liner. Computer Cut, Tractor Feed, Single Liner format. Factory Order Only. Available in 10 yard rolls, 15" and 30".
3M Scotch Stencil Fillers
3M Stencil Filler 2 Light beige rubber base coating used to increase the adhesion of 3M Abrasive Blasting Stencils to stone monument surfaces during the blasting process. Typically used on smooth or polished surfaces. Available in Gallons and Quarts.
3M Stencil Filler 3 Same as #2 except designed for axed or frosted surfaces. Available in Gallons only.
Adhesive Transfer Tape This product is used in place of stencil filler. For cemetery lettering, bricks, frosted panels, and flat markers. After blasting, simply remove stencil. Transfer tape adheres to the stencil, so no clean up is needed. 2”, 4” and 6” widths x 60 yd.
|
3M Scotch Brand Stencil Products are known for quality in monument stencil industry. These products give you ease of cut and superior sandblast protection. You’ll find a variety of versatile stencils for hand cut and machine cut monument stencils. 3M Scotch Brand Stencil provide superior blast resistance, precise and intricate design capabilities, clean transfers, smooth and accurate tracking and a convenient selection of sizes.